Micro Metal Injection Molding (Micro MIM) has attracted a great deal of attention and application as a highly sophisticated metal manufacturing technology. This technology combines traditional metal injection moulding with micromachining, making it possible to produce complex micro metal parts. This article will focus on the process principles, application areas and the potential of micro MIM technology for precision manufacturing.
Micro Metal Injection Molded Gears for the Medical Industry
Process principle:
Micro MIM technology is based on the principles of metal injection moulding and combines powder metallurgy, injection moulding and micromachining technologies. First, metal powder is mixed with a polymer binder and mechanically mixed and heated to form a flowable injection material. The injected material is then injected into a miniature mould, which is pressurised to fill the cavity. After injection moulding, the binder is removed and the metal particles are bonded to each other through a sintering and post-treatment process, resulting in dense, mechanically superior miniature metal parts.
There are several important considerations to keep in mind during the application of micro MIM technology:
Material selection: The selection of suitable metal powders and binders is critical to the success of micro-MIM. Metal powders should have good flow and sinterability properties and be able to provide the required mechanical properties and corrosion resistance. The choice of binder should take into account its sintering properties and its ability to bond to the metal particles. The selection and optimisation of materials is therefore required during the development process.
Injection moulding parameters: The setting of parameters during the injection moulding process is crucial for obtaining high-quality micro-metallic parts. Parameters such as injection pressure, injection speed and injection temperature need to be optimised to ensure that the injection material can completely fill the mould cavity and maintain the required shape and dimensional accuracy.
Sintering process: Sintering is a key step in the transformation of the injection moulded part into a dense metal part. During sintering, parameters such as sintering temperature, holding time and atmosphere need to be controlled to ensure that the binder is completely removed and that the metal particles are bonded to each other to form a dense structure.
Post-treatment processes: After sintering, a number of post-treatment steps may be required to achieve the desired surface quality and precision. This may include steps such as machining, grinding, polishing etc. to meet the requirements of the final product.
Mould design: Micro MIM technology requires the use of miniature moulds for injection moulding, therefore, the design and manufacture of the moulds is essential to obtain accurate shapes and dimensions. The mould should take into account factors such as material flow, cooling effectiveness and the wear resistance of the mould.
By following these considerations, the success of micro MIM technology can be improved and high quality micro metal parts can be obtained. However, specific considerations may exist for each specific application and therefore detailed process development and optimisation is required for practical applications.
In micro metal injection moulding (MIM), mould design is a key factor in ensuring successful injection moulding and obtaining accurate shapes and dimensions. The following are some detailed descriptions and considerations in terms of mould design:
Mould material: Moulds are usually made from high hardness and wear resistant tool steels, such as stainless steel, which has good rigidity and wear resistance. This material is able to withstand high pressure injection and high temperature sintering processes and has sufficient life and stability.
Mould cavity design: The design of the mould cavity should take into account the flow of the injected material, the cooling effect and the shape of the part. The cavity should have sufficient filling capacity to ensure that the injected material is adequately filled and formed into the required shape of the part. At the same time, the design of the cooling system needs to be taken into account to improve the cycle time of injection moulding and to control the temperature distribution in order to avoid distortion or uneven shrinkage of the part.
Gating and venting systems for the part: the gate is the entry point for the injection material into the cavity, while the venting system is used to remove the air generated during the injection process. The location and shape of the gate should take into account the material flow and avoid the formation of air bubbles. The venting system should be designed to allow effective gas removal and to avoid the formation of gas traps.
Mould separation and part release: As micro MIM parts often have complex shapes and small features, the design of the mould should take into account the separation and release of the part. This includes proper mould construction and surface preparation to ensure that parts can be separated and demoulded from the mould smoothly to avoid damage or distortion.
Mould maintenance and repair: Moulds can be damaged or worn due to wear and thermal stress during injection moulding and sintering. Mould maintenance and reconditioning is therefore an important consideration in mould design. A regular maintenance schedule needs to be established and ensure that damage to the mould is repaired in a timely manner in order to maintain production consistency and quality.
In conclusion, mould design plays a vital role in micro MIM technology. Proper mould design ensures the success of injection moulding and consistent part quality. By taking into account factors such as material flow, cooling effects, part separation and demoulding, as well as proper maintenance and repair, mould life and production efficiency can be improved.
XY GLOBAL has a rigorous process for every step of the process, from production to volume production. If you require custom MIM related parts, contact XY GLOBAL for a dedicated engineering team to solve your problem and obtain high quality on-demand parts with expert prototyping and production capabilities. Our quotations and DFM analysis can be completed online in minutes and quality parts can be delivered within days.